GBM-8

8-fold track occupancy detector

Suitable for an extension of the Roco Feedbackmodule 10787!

Features of the GBM-8

  • If you use the Roco-Digital-System together with the Interface 10785 and the Software Rocomotion, you can use the track occupancy detector GBM-8 as an extension of the Roco Feedbackmodule 10787 to receive a comfortable and low-cost track occupancy report system.
  • There are no more switch-rails 42518 required. You simply isolate one rail at the track section to be monitored and connect this section with one of the 8 inputs of the track occupancy detector GBM-8.
  • The monitored track section will receive digital current via the 8-fold occupancy detector GBM-8. As soon as a current consumer (loc or a wheel set with resistance or conductive lacquer) will be within the monitored track section the GBM-8 will report the occupancy situation to the Roco Feedbackmodule 10787.
  • The GBM-8 recognizes currents from 0,001 Ampere. The maximum digital current on each output can be up to 3 Ampere (peak current up to 7 Ampere).
  • The GBM-8 requires no separate voltage supply. Therefore is a minimum of wiring required.
  • The 8-fold track occupancy detector GBM-8 is devided into two 4-fold track occupancy detectors. Therefore is it possible to monitor tracks of two different booster sections. The partioning into two 4-fold track occupancy detectors simplifys the monitoring of terminal loops as well.

  • The finished module and the finisheh module in a case comes with 24 month warranty.
  • Each track occupancy detector will be supplied with a detailed operating-/ assembly instruction. Those instructions can be found within the next section.
  • The GBM-8 is available as a kit (-B), as tested finished module (-F) or as tested finished module in a case (-G). Suitable assembly material for the kit or the finished module is available under Accessories.

Downloads

Instructions regarding this article can be found here: Downloads GBM-8.
Instructions for all LDT-Components can be found here: Overview Downloads

Sample-Connections

Sample-connections regarding this article can be found here: Sample-Connections GBM-8.
Sample-connections for all LDT-Components can be found here: Overview Sample-Connections.

Add to Wish List / Prices

Attention: Products can only be added to the Wish List, if you are registered as customer at the LDT WebShop or if you are initially registered by interest of our products.


Add to Wish List: GBM-8-B (Part-No.: 020001): 8-fold track occupancy detector for the Roco Feedbackmodule 10787 as a kit (29,90 €*).
Add to Wish List: GBM-8-F (Part-No.: 020002): 8-fold track occupancy detector for the Roco Feedbackmodule 10787 as a finished module (44,50 €*).
Add to Wish List: GBM-8-G (Part-No.: 020003): 8-fold track occupancy detector for the Roco Feedbackmodule 10787 as a finished module in a case (47,90 €*).

* All prices incl. VAT, plus Shipping.

Subject to technical changes and errors.
© 2014 by LDT

 
Recent changes RSS feed Creative Commons License Donate Powered by PHP Valid XHTML 1.0 Valid CSS Driven by DokuWiki Design by Chirripó