• If you want to use our low-cost DigitalBooster DB-2 as well on a command station which does not support a 5-poles booster bus but the 3-poles DCC-booster bus only you can apply now the Booster Adapter Adap-CDE.
• The application of the DigitalBooster DB-2 on e.g. Lenz Digital plus Systems or together with IB-BASIC, IB-COM and the PIKO Digi-Power-Box is now possible via the Adapter Adap-CDE.
• Up to 10 DigitalBooster DB-2 can be connected to each Adapter Adap-CDE.
• Opto-couplers at the Adapter Adap-CDE will provide a galvanical separation between booster and command station and will therefore assure a safe electrical operation.
• Each Booster Adapter Adap-CDE will be supplied with a detailed operating- /respectively assembly instruction. Those instructions can be found within the next section.
• This finished module in a case comes with 24 month warranty.
• The Adapter Adap-CDE will be supplied as kit (-B) or as tested finished module in a case (-G). Suitable assembly material and an empty case LDT-01 for the installation of up to two Adapter Adap-CDE for a kit can be found under accessories.

Instructions regarding this article can be found here: Downloads Adap-CDE.
Instructions for all LDT-Components can be found here: Overview Downloads.

Sample-connections regarding this article can be found here: Sample-Connections Adap-CDE.
Sample-connections for all LDT-Components can be found here: Overview Sample-Connections.

Attention: Products can only be added to the Wish List, if you are registered as customer at the LDT WebShop or if you are initially registered by interest of our products.

	Add to Wish List: Adap-CDE-B (Part-No.: 088261): Adapter from the 3-poles DCC-Booster bus to the 5-poles (DB-2) Booster bus as a kit (19,90 €*). Add to Wish List: Adap-CDE-G (Part-No.: 088263): Adapter from the 3-poles DCC-Booster bus to the 5-poles (DB-2) Booster bus as a finished module in a case (32,90 €*). * All prices incl. VAT, plus Shipping.

Subject to technical changes and errors.
© 2014 by LDT