Our Digital Novelities 2012, introduced at the Toy Fair in Nuremberg from 1. till 6. February:

Our Novelty-information 2012 (in German language only) is available for downloading here!

Normally the s88-feedback bus expects all connected feedback modules behind each others in one line. The data switch DSW-88-N provides the possibility to split the s88-feedback output!
The data switch DSW-88-N provides in addition three 6-poles pin bars for the s88 standard connection and as well three RJ-45 sockets for a bus connection according to s88-N.

Available ex warehouse.

> To product description: DSW-88-N

Via the Light-Signal-Decoder LS-DEC-BR is the connection and control of either four 2- to 4-aspect signals or two 2- to 4-aspect signals with feather possible.

Available ex warehouse.

> To product description: LS-DEC-BR

Via the Light-Signal-Decoder LS-DEC-KS is the digital switching of two Ks-Signals of the Ks-Signalsystem from the Deutsche Bundesbahn possible. It is possible to connect and control Ks-Entry, Ks-Exit, Ks-Advance-Signals and as well Ks-Entry- and Ks-Exit-Multiple-Section-Signals with up to 16 Signal-Aspects.

Available ex warehouse.

> To product description: LS-DEC-KS

Our Novelty-information 2011 (in German language only) is available for downloading here!

The Booster Keep Separation Module BTM-SG provides a secure electrical separation of Booster Circuits. A switch-over track, situated between two booster circuits as separation section will receive only from one booster digital current supply depending to the travelling direction of the train.

Available ex warehouse.

> To product description: BTM-SG

The 8-fold Feedback Module RS-8 contains integrated track occupancy sensors. This module is suitable for monitoring isolated track sections which receive digital current from the RS-8. The design of the RS-8 is suitable for the application at the RS-Feedback Bus of the Digital plus System of company Lenz. The RS-8 is now available as finished module in a case under order code RS-8-G.

Available ex warehouse.

> To product description: RS-8

The Turntable-Decoder TT-DEC-R is suitable for the digital drive of the Roco H0 Turntable 42615.

Available ex warehouse.

> To product description: TT-DEC-R

Our Novelty-information 2010 (in German language only) is available for downloading here!

The Adapter Adap-HSI-s88-N enables to connect s88-Feedbackmodules such as RM-88-N, RM-88-N-O and RM-GB-8-N according to s88-N directly to the Interfaces HSI-88, HSI-88-USB and DiCoStation via the screened Patch-Kabel.

Available ex warehouse.

> To product description: Adap-HSI-s88-N

The DigitalBooster DB-4 provides 2,5 or 4,5 Ampere digital current and supports the digital formats Märklin-Motorola and DCC. With the galvanic separated booster bus connection (5-poles-, CDE- and Roco-booster bus) is it possible to use it on several command stations.

Available ex warehouse.

> To product description: DB-4

The Light-Interface LI-LAN is a PC-Network-Interface for the Model Railway Layout- and Ambient-Room Light-Control Light@Night.

Available ex warehouse.

> To product description: LI-LAN

Empty case for the DigitalBooster DB-4 and the 8-fold Feedback-Module RM-GB-8-N.

Available ex warehouse.

> To product description: LDT-02

The 8-fold Feedback-Module with integrated track occupancy report (novelty 2009) is now available as finished module in a case LDT-02.

Available ex warehouse.

> To product description: RM-GB-8-N

Reverse-Loop Module with short circuit protected polar reversal via 2 sensor tracks. With reason to an external power supply possibility is a simple combination with feedback module with integrated track occupancy report (e.g. RM-GB-8(-N) and RS-8) possible for the control of the reverse-loop.

Available ex warehouse.

> To product description: KSM-SG

16-fold Standard-Feedback Module (switching against ground) for s88-standard connections via 6-poles s88-pin bars or s88-N via RJ-45 sockets.

Available ex warehouse.

> To product description: RM-88-N

16-fold Feedback Module with opto-coupling inputs for potential separation and for high interference protection. For s88-standard connections via 6-poles s88-pin bars or s88-N via RJ-45 sockets.

Available ex warehouse.

> To product description: RM-88-N-O

8-fold Feedback Module with integrated track occupancy report for s88-standard connections via 6-poles s88-pin bars or s88-N via RJ-45 sockets.

Available ex warehouse.

> To product description: RM-GB-8-N

High Speed Interface for the s88-Feedback bus! Transmits the Feedback-Information from the s88-Feedback-bus without any detours directly via the command station and the USB-Interface to the PC.

Available ex warehouse.

> To product description: HSI-88-USB

The Turntable-Decoder TT-DEC is suitable for the digital control of Fleischmann-Turntable 6052, 6152, 6154, 6651, 9152, 6680 (each with and without “C”), 6652 (with 3-rail conductor), the Roco-Turntable 35900 and the Märklin-Turntable 7286. Mechanical alterations at the turntable are not required!

Available ex warehouse.

> To product description: TT-DEC

Lightsignal-Decoder for Home Signals with 4 or 5 lamps and Shunting Signals of the National Maatschapping of the Belgian Spoorwegen (NMBS).

Available ex warehouse.

> To product description: LS-DEC-NMBS

Subject to technical changes and errors.
© 2012 by LDT