Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen gezeigt.

en:produkte_cs1_mm [2022/08/17 09:42] (current)
Line 1: Line 1:
 +====== LDT-Digital components for Märklin Central Station 1 (60212) (Märklin-Motorola-Format) ======
  
 +Within the following listing you can find all products of our company. By activating a particular link you will receive detailed information and the **possibility** to order the article.\\  \\  **Further overviews about our products:**
 +
 +    * [[:en:produkte_nach_digitalsystem|To Product Overview sorted by digital system or digital command stations]]    * **To Product Overview sorted  by digital format:**
 +      * [[:en:produkte_mm|Märklin-Motorola-Dataformat]]
 +      * [[:en:produkte_dc|DCC-Dataformat]]
 +
 +
 +{{:de:images:blindgif.gif?5x5}}
 +
 +----
 +
 +{{:de:images:blindgif.gif?5x5}}
 +
 +Because every LDT-Decoder with external power supply includes a galvanical separation between the digital electrical circuit and the power supply is an application of the decoder at the Central Station 1 possible without any problem.\\  \\  {{  :de:cad:centralstation_01.gif?585x342  }}At the sample (attend to the above Display of the Central Station) will be the first 8 turnouts (addresses 1 to 8) switched via two Tournout-Decoder S-DEC-4-MM.\\  \\  Via the left clamp bar of a Light-Signal Decoders LS-DEC-DB will it be possible to switch one main signal via address 13 and 14 and one block signal via address 15.\\  \\  Two outputs of a Switch-Decoder SA-DEC-4-MM can switch lights on or off at the layout via addresses 17 und 18.
 +
 +{{  :de:foto:sa-dec-4-mm-g_24_ic.jpg? }}
 +
 +====== Switching ======
 +
 +At the section "**Switching**" our program offers decoders for the digital format of **Märklin-Motorola**.
 +
 +===== Turnout Decoder =====
 +
 +
 +    * [[:en:s-dec-4|S-DEC-4]]: 4-fold turnout decoder for Märklin-Motorola and DCC Digital with a self-learning decoder address.\\  With an external power supply possibility.
 +    * [[:en:dsu|DSU]]: Permanent-Power-Switch-Unit as accessory for the turnout decoder S-DEC-4 and for the turntable decoder TT-DEC.
 +
 +===== Switch Decoder =====
 +
 +    * [[:en:sa-dec-4|SA-DEC-4]]: 4-fold switch decoder with 4 bistable relays with each 2 Amp. switching power.\\  With self learning decoder address and external power supply possibility.
 +
 +===== Turnout-Decoder for motor driven turnouts =====
 +
 +    * [[:en:m-dec|M-DEC]]: 4-fold decoder for motor driven turnouts with self-learning decoder address and\\  external power supply possibility.
 +
 +===== Light-Signal Decoder =====
 +
 +4-fold Light-Signal Decoder with a self-learning decoder address and external power supply.
 +
 +    * [[:en:ls-dec-db|LS-DEC-DB]]: Light-Signal Decoder (Deutsche Bundesbahn).
 +    * [[:en:ls-dec-dr|LS-DEC-DR]]: Light-Signal Decoder (Deutsche Reichsbahn).
 +    * [[:en:ls-dec-ks|LS-DEC-KS]]: Light-Signal Decoder (Deutsche Bahn).
 +    * [[:en:ls-dec-oebb|LS-DEC-ÖBB]]: Light-Signal Decoder (Austrian Federal Railway).
 +    * [[:en:ls-dec-sbb|LS-DEC-SBB]]: Light-Signal Decoder (Swiss Federal Railway).
 +    * [[:en:ls-dec-ns|LS-DEC-NS]]: Light-Signal Decoder (Nederlandse Spoorwegen).
 +    * [[:en:ls-dec-nmbs|LS-DEC-NMBS]]: Light-Signal Decoder (Nationale Maatschapping of the Belgian Spoorwegen).
 +    * [[:en:ls-dec-br|LS-DEC-BR]]: Light-Signal Decoder (British Railway).
 +    * [[:en:ls-dec-fs|LS-DEC-FS]]: Light-Signal Decoder (Governmental Railway Corporation of Italy – Ferrovie dello Stato).
 +    * [[:en:ls-dec-sj|LS-DEC-SJ]]: Light-Signal Decoder (Swedish State Railway).
 +    * [[:en:ls-dec-sncf|LS-DEC-SNCF]]: Light-Signal Decoder (Governmental Railway Corporation of French - Société Nationale des Chemins de fer Français).
 +    * [[:en:ls-dec-cfl|LS-DEC-CFL]]: Light-Signal Decoder (National Railway Company of Luxembourg).
 +    * [[:en:ls-dec-usa|LS-DEC-USA]]: Light-Signal Decoder (for American Color Light Signals).
 +    * [[:en:ls-dec-csd|LS-DEC-CSD]]: Light-Signal Decoder (Czechoslovakian National Railway).
 +    * [[:en:ls-dec-8x2|LS-DEC-8x2]]: Light-Signal Decoder (for eight 2-aspect Light Signals).
 +
 +===== Adapter for Light-Signal Decoder =====
 +
 +    * [[:en:adap-ls|Adap-LS-A]]: Adapter for Light-Signal Decoder LS-DEC for light signals with incandescent lamps,\\  light signals with incandescent lamps and light emitting diodes with common anodes.
 +    * [[:en:adap-ls|Adap-LS-K]]: Adapter for Light-Signal Decoder LS-DEC for light signals with light emitting diodes\\  with common cathodes.
 +
 +===== Train Influence Module for Light-Signal Decoder =====
 +
 +    * [[:en:zbm|ZBM]]: 4-fold train influence module for 4 stop sections. Cuts off the driving power supply if signal is on red.
 +
 +===== TurnTable-Decoder =====
 +
 +    * [[:en:tt-dec-r|TT-DEC-R]]: The Turntable-Decoder TT-DEC-R is suitable for the digital control of the Roco H0 Turntable 42615.
 +    * [[:en:tt-dec|TT-DEC]]: The Turntable-Decoder TT-DEC is suitable for the digital control of  Fleischmann-Turntables 6052, 6152, 6154, 6651, 9152, 6680 (with and without ”C”), 6652 (with 3-rail conductor), the Roco Turntable 35900 and the Märklin-Turntable 7286.
 +    * [[:en:dsu|DSU]]:  Permanent-Power-Switch-Unit will change the polarity of a 2-conductor turntable bridge at every 180 degree turning of the turntable if combined with the TurnTable-Decoder TT-DEC.
 +
 +===== WatchDog-Decoder =====
 +
 +    * [[:en:wd-dec|WD-DEC]]: The WatchDog decoder WD-DEC is a watch-dog for your pc supported  digital model-train-railroad. If the model railway software has lost the control about the layout, the WD-DEC will switch the tracks free of current via the connected boosters and all trains will be immediately stopped.
 +
 +===== Decoder for Switchboard Lights =====
 +
 +    * [[:en:gbs-dec|GBS-DEC]]: The Decoder for Switchboard Lights GBS-DEC supplies current to the light emitting diodes or to the incandescent lamps of the track switchboard panel. The GBS-DEC is available for the digital formats Märklin-Motorola and DCC as well for the s88-feedback bus. The Decoder for Switchboard Lights GBS-DEC consist of a GBS-Master Module, a GBS-Display Module and the GBS-Service Module.
 +    * [[:en:s88-clockmaster|s88-ClockMaster]]: As a supplement to the Switchboard Light-Decoder GBS-DEC to be used without a digital command station or without a PC with model railway software.
 +
 +====== Feedback ======
 +
 +For “**Feedback**” we offer products for the **s88**-feedback bus.
 +
 +===== s88-feedback bus =====
 +
 +    * [[:en:rm-88-n|RM-88-N]]: 16-fold Standard-Feedback Module (switching against ground) for s88-standard connections and bus connections in accordance to s88-N.
 +    * [[:en:rm-88-n-o|RM-88-N-O]]: 16-fold Feedback Module with opto-coupling inputs for potential separation and for high interference protection. For s88-standard connections and bus connections in accordance to s88-N.
 +    * [[:en:rm-gb-8-n|RM-GB-8-N]]: 8-fold Feedback Module with integrated track occupancy report for s88-standard connections and bus connections in accordance to s88-N.
 +    * [[:en:dsw-88-n|DSW-88-N]]: With the Data switch DSW-88-N the s88-feedback bus can be branched into two lines at any place on the model railway. Several DSW-88-N can be used to build one ore more feedback lines. For s88-standard connections and bus connections in accordance to s88-N.
 +
 +====== DigitalBooster ======
 +
 +    * [[:en:db-2|DB-2]]: The short-circuit proofed DigitalBooster DB-2 supplies 2.5 Ampere digital current. The DB-2 shall be connected to the command station via a 5-poles booster bus and amplifies the digital formats Märklin-Motorola, mfx®, M4 and DCC.
 +    * [[:en:db-4|DB-4]]: The DigitalBooster DB-4 provides 2.5 or 4.5 Ampere digital current. Via the galvanic separated booster bus (5-poles-, CDE- and Roco-booster bus) is it possible to connect it to the command station and amplifies the digital formats Märklin-Motorola, mfx®, M4 and DCC.
 +
 +====== Booster Keep Separate Module ======
 +
 +    * [[:en:btm-sg|BTM-SG]]: Provides a secure electrical separation of booster current circuits.\\  Suitable for all digital formats, all command stations and boosters.
 +
 +====== High Speed Interfaces ======
 +
 +Legal Doping: High Speed Interface for the s88-feedbackbus!\\  To provide feedback reports fast and without detours via the digital command station to the PC we offer the High Speed Interfaces for the s88-feedback bus within our program. With this option you can install up to 3 s88-feedback lines with up to 496 contacts.
 +
 +    * [[:en:hsi-88|HSI-88]]: High-Speed-Computer-Interface for fast report of s88-feedback modules to the PC via the COM-interface.
 +    * [[:en:hsi-88-usb|HSI-88-USB]]: High-Speed-Computer-Interface for fast report of s88-feedback modules to the PC via the USB-interface (1.1 / 2.0 Full-Speed).
 +    * [[:en:adap-hsi-s88-n|Adap-HSI-s88-N]]: With the Adapter is it possible to connect s88-feedback modules in accordance to s88-N direktly to the interfaces.
 +
 +====== SupplyBox ======
 +
 +    * [[:en:sb-4|SB-4]]: Practical unit for the direct current supply from switched mode mains power supply.
 +
 +====== Accessories ======
 +
 +Here you can find e.g. Assembly Material, Casings or Bus cable for our Components.
 +
 +    * [[:en:zubehoer|MON-SET]]: For fitting devices underneath the layout we supply suitable installation material consisting of four spacers each 5mm long and four 13mm screws.
 +    * [[:en:zubehoer#Case LDT-01|LDT-01]]: The small elegant practical case for several LDT-components. Suitable for: 1-DEC-DC (from version 2), Adap-CDE, Adap-Roco, COL-10, DB-2, DSW-88-N, GBM-8, HSI-88(-USB), KeyCom, KSM-SG, LS-DEC, M-DEC (from version 2), RM-88-N, RM-88-N-O, RS-16-O, s88-CM, S-DEC-4, SA-DEC-4, SB-4, TD-88, TT-DEC(-R), BTM-SG, WD-DEC and ZBM.
 +    * [[:en:zubehoer|LDT-02]]: The big elegant practical case for LDT-components.\\  Suitable for: DB-4, RM-GB-8-N and RS-8 (from version 3.2).
 +    * [[:en:zubehoer|Kabel s88]]: Connection cable (0.5m, 1m, 2m) for s88-standard connection with two original s88-plugs plus pin-plug for bus extension.
 +    * [[:en:zubehoer|Kabel Patch]]: Connection cable (0.5m, 1m, 2m, 3m) for s88-standard connections according to s88-N with 2 RJ-45 plugs.
 +    * [[:en:zubehoer|Kabel Booster]]: 5-poles booster bus-cable (1m) with twisted wires and interference protected for the connection of command stations (e.g. Control Unit, Central Station 2, Intellibox, TWIN-CENTER) with boosters (e.g. 6015 / 6017, Power 3, TWIN-BOOSTER, DB-2, DB-4) and for connecting boosters to each other.
 +    * [[:en:zubehoer|Ferrite pearls]]: For the elimination of disturbance caused by turnouts with integrated end switches.
 +    * [[:en:e-artikel-home|Electronic articles]]: Electronic articles for Model-Railroader.
 +    * [[:en:e-ersatzteile-home|Electronic Spare Parts]]: Electronic Spare Parts for LDT-Components.
 +
 +\\  \\  Subject to technical changes and errors.\\  © 2022 by LDT [[:en:produkte_cs1_mm#top|{{  :de:images:zurueck_en_page.png?40x32}}]]
 
Recent changes RSS feed Creative Commons License Donate Powered by PHP Valid XHTML 1.0 Valid CSS Driven by DokuWiki Design by Chirripó