Table of Contents

DiCoStation (DirectCommandStation)

Command Station for the USB-Interface with the digital formats DCC and Märklin-Motorola plus three s88 Feedback Lines!

DiCoStation with USB- and Booster Connection


If you wanted to monitoring and control your model railway with a PC-Software you had to implement in the past a command station with integrated PC-Interface or an additional external interface suitable to your command station.

The DirectCommandStation (DiCoStation) offers now a low-cost command station which will work without any push-buttons and speed regulator because this functions will be taken over from the PC-Model Railway Software.

The DiCoStation contains a 1.1/2.0 Full Speed USB-Connection to the PC. All USB-Units require a so called USB-Unit Driver Software which can be found at the section Downloads for the DiCoStation.

Via the 5-poles Boosterbus-connection is it possible that up to 10 DigitalBooster DB-2, DB-4 or compatible Booster can supply the required capacity to the rails and to accessory decoders such as Turnout-Decoders with digital informations.

The DiCoStation creates as multiprotocol-central-unit the data formats Märklin-Motorola and DCC which can be available as mixed formats as well.

The DiCoStation contains additionally the connections for three s88-Feedback Lines for up to 496 Feedback Contacts.

Correct connection of the s88-standard feedback cables of all three feedback lines to the DiCoStation: Right hand and at the middle an interference-free twisted s88-standard bus cable from our delivery program. Left hand a ribbon-cable from Märklin or other manufacturer.

With the adapter Adap-HSI-s88-N is it possible to connect s88-Feedback Modules such as RM-88-N, RM-88-N-O or RM-GB-8-N directly via the screened Patch-Kabel to the DiCoStation in accordance to s88-N. For this connection shall be the Adapter Adap-HSI-s88-N simply plugged onto the three 6-poles pinbar of the DiCoStation.

Features of the DiCoStation

Downloads

Instructions regarding this article can be found here: Downloads DiCoStation.
Instructions for all LDT-Components can be found here: Overview Downloads.

Sample-Connections

Sample-connections regarding this article can be found here:
Sample-Connections DiCoStation (3-rail conductor) and
Sample-Connections DiCoStation (2-rail conductor).
Sample-connections for all LDT-Components can be found here: Overview Sample-Connections.

Add to Wish List / Prices

Attention: Products can only be added to the Wish List, if you are registered as customer at the LDT WebShop or if you are initially registered by interest of our products.


Add to Wish List: DiCoStation-G (Part-No.: 009903): DirectCommandStation (DiCoStation) as a finished module in a case (129,90 €*).

* All prices incl. VAT, plus Shipping.

DiCoStation software compatibility

The below table indicates which model railroad software supports the DiCoStation:

Brand Company/Internet Site DiCoStation support
Railroad & Co. Freiwald Software www.freiwald.com yes
Railware Railware Andrea Hinz railware.de yes
WIN-Digipet Dr. Peterlin www.windigipet.de yes
Koploper P. Haagsma www.pahasoft.nl yes
railX W. Schwickardi www.railX.de yes
RocRail wiki.rocrail.net yes
DDL - DigitalDirect for Linux www.vogt-it.com/OpenSource/DDL/ not yet
iTrail www.berros.eu/itrain 2.1
ModellStw www.modellstw.eu yes

Subject to technical changes and errors.
© 2022 by LDT