LS-DEC-CFL

Light-Signal Decoder for up to 4 Light Signals of the National Railway Company of Luxembourg (CFL)

for LED (light emitting diodes)-assembled signals and the data formats Märklin-Motorola and DCC from the Digital-Professional-Series !

You can purchase the Light-Signal Decoder LS-DEC from us as a kit, as a finished module or as a finished module in a case.

Features of the LS-DEC-CFL

Realistic switching of light-signals via accessory addresses:

With the Light-Signal Decoder LS-DEC is it possible to switch light signals via accessory addresses. Ideal for Digital Central Units which are switching turnout tracks and Model Railway Layouts which are controlled by PC and control software. The signal wiring will be simply connected to the signal-module by practical and secure clamps.
With the Light-Signal Decoder LS-DEC-CFL can be up to four Main-, Advance- or Line-Close signals or up to two combined Main-/Line-Close signals connected and controlled.

Sample Connection 1: Connection of one Main- and Advance-signal to the left clamp bar and two Main-signals to the right side.

Sample Connection 2: Connection of one Main- and Advance-signal to the left clamp bar and one combined Main-/Line-Close signal to the right side.

Programmable Dark-switching if Advance- and Main-signal are assembled onto one common pole.
Signal aspects will not simply be cross faded but as in reality the prior aspect will be firstly dimmed-down and after a short dark phase the new signal aspect will appear. The light emitting diodes will be dimmed up and down during this process.

above: conventional signal change by simple switching. below: realistic signal change with dim- and dark phase with the Light-Signal Decoder LS-DEC.

With series resistors for the light emitting diodes integrated within the Light-Signal Decoder LS-DEC.
Suitable for all LED-light signals with common anode or common cathode.
The signal current has not necessarily to be supplied by a booster but can be directly feeded into a separate input from a model railroad transformer. This saves expensive digital current.
With a jumper you can select if the decoder shall operate on a Märklin-Motorola system or on a digital system with DCC Standard.
Decoder of the Digital-Professional-Series can be used on your digital system without any problems because they are compatible to the Märklin-Motorola-Data format respectively to the DCC Standard.
The finished module and the finished module in a case comes with 24 month warranty.
Each decoder LS-DEC-CFL will be supplied with a detailed operating-/respectively assembly-instruction.
You can purchase the Light-Signal Decoder as a kit (-B), as tested finished module (-F) or as tested finished module in a case (-G). Suitable assembly material for the kit or the finished module is available under Accessories.

Downloads

Instructions regarding this article can be found here: Downloads LS-DEC-CFL.
Instructions for all LDT-Components can be found here: Overview Downloads.

Sample-Connections

Sample-connections regarding this article can be found here: Sample-Connection LS-DEC-CFL.
Sample-connections for all LDT-Components can be found here: Overview Sample-Connections.

Digital-Compendium

A Digital-Compendium to this article can be found here: Digital-Compendium LS-DEC-CFL.
An overview for all Digital-Compendium articles can be found here: Overview Digital-Compendium.

Add to Wish List / Prices

Attention: Products can only be added to the Wish List, if you are registered as customer at the LDT WebShop or if you are initially registered by interest of our products.

	Add to Wish List: LS-DEC-CFL-B (Part-No.: 514011): Light-Signal Decoder for CFL-Signals as a kit (42,90 €). Add to Wish List: LS-DEC-CFL-F* (Part-No.: 514012): Light-Signal Decoder for CFL-Signals as a finished module (53,50 €). Add to Wish List: LS-DEC-CFL-G* (Part-No.: 514013): Light-Signal Decoder for CFL-Signals as a finished module in a case (56,90 €). All prices incl. VAT, plus Shipping. (All decoders are suitable for Märklin-Motorola and DCC digital-model rail roads.)

Add to Wish List: LS-DEC-CFL-B (Part-No.: 514011): Light-Signal Decoder for CFL-Signals as a
kit (42,90 €*).
Add to Wish List: LS-DEC-CFL-F (Part-No.: 514012): Light-Signal Decoder for CFL-Signals as a
finished module (53,50 €*).
Add to Wish List: LS-DEC-CFL-G (Part-No.: 514013): Light-Signal Decoder for CFL-Signals as a
finished module in a case (56,90 €*).

* All prices incl. VAT, plus Shipping.
(All decoders are suitable for Märklin-Motorola and DCC digital-model rail roads.)