Introduced to the Toy-Fair 2018:

Our Novelty-information 2018 is available for downloading here!

Via the Light-Signal Decoder LS-DEC-CSD is the connection and digital control of either four CSD departure signals, home signals, advance signals as well as shunting signals possible.

Available ex warehouse.

> To product description: LS-DEC-CSD

With the Light-Signal Decoder LS-DEC-8×2 is it possible to switch up to eight 2-aspect light sinals.

Available ex warehouse.

> To product description: LS-DEC-8x2

Introduced to the Toy-Fair 2017:

Our Novelty-information 2017 is available for downloading here!

Via the Light-Signal Decoder LS-DEC-CFL is the connection and digital control of either four CFL main-, advance- or line-close signals or two combined main-/line-close signals possible.

Available ex warehouse.

> To product description: LS-DEC-CFL

With the Light-Signal Decoder LS-DEC-USA is it possible to switch digital up to four 2- or 3-aspect American Color Light Signals.

Available ex warehouse.

> To product description: LS-DEC-USA

Introduced at the Toy-Fair 2016:

Our Novelty-information 2016 is available for downloading here!

Various light functions can be assigned to up to 160 light outputs and can control automatically those functions throughout the day or they can be activated or deactivated via push buttons or DCC-commands.

The Layout-Light-Control Light-DEC is modular designed and can be therefore optimal adapted to any layout size and to any individual requirement at low cost.

It consist of the new Light-DEC-Basic-Module (at the picture right) and as minimum one Light-Module (Light-Display – at the picture left - or Light-Power) which has to be plugged to the side of the Basic-Module.

Available ex warehouse.

> To product description: Light-DEC

Our Novelty-information 2015 is available for downloading here!

If the Light-Module of the PC-light control Light@Night shall be assembled at a greater distance to be closer to the light sources in the past the Kabel Light@Night with the length of 0.5m, 1m and 2m has been used.

For covering in future greater distances free from interferences the light module are now equipped with RJ-45 sockets. Now is it possible to use screened interference protected Patch-Cable (computer network cable) to connect various module.

Available ex warehouse.

> To product description: Light@Night

Via the Light-Signal Decoder LS-DEC-SNCF is the connection and control of either four 2- to 4-aspect signals or two up to 16-aspect SNCF-signals possible.

Available ex warehouse.

> To product description: LS-DCE-SNCF

Driving – Switching – Feedback
Author: Henning Kriebel

Sample of contents:

• Short and understandable: digital data transfer;
  
• No problem: two- or three-conductor systems within the digital controlled operation;
  
• Booster on small and bigger layouts;
  
• Switching of turnouts, signals and illumination;
  
• Control of turntables;
  
• Feedback reports of two- and three-conductor systems;
  
• Fast feedback reports via High Speed Interfaces (HSI);
  
• Simple solutions of reverse loop problems.
  

And many more issues.
164 pages with 171 illustrations and 10 graphics
(available in German language only!).

Available ex warehouse.

> To product description: Be a Digital-Professional

With the 1-DEC-DC is the digital control of up to 4 single coil turnout drives (e.g. LGB, Piko G, Kato Unitrack, Tomix, Rokuhan) possible.

The switching current of each output can be up to 1 Ampere. The drives will be switched with a short impulse. Therefore can be drives with or without final disconnection used.

Till now was the 1-DEC-DC as a kit and as a finished module available, from now on is it as well as a finished module in a case available.

Available ex warehouse.

> To product description: 1-DEC-DC

The Decoder M-DEC supplies on all 4 outputs the drive voltage for motor driven turnouts.

The motor voltage will be polarized in accordance to the switching direction. The motor current can be up to 1 Ampere.

Therefore can be motor driven turnout drives e.g. Fulgurex, Hoffmann, Conrad, Tillig and BEMO digital controlled without problems.

Till now where the Decoder M-DEC-MM for the Märklin-Motorola-data format and M-DEC-DC for the DCC-data format available as a kit and as a finished module. From now on are those Decoders available as well as a finished module in a case.

Available ex warehouse.

> To product description: M-DEC

Nowadays the classical model railway transformer will not be used anymore. As a replacement will now be switched mode power supply units used.

The switched mode power supplies have a connected plug which shall probably not to be removed.

The alternative will be the SupplyBox SB-4.

Available ex warehouse.

> To product description: SB-4

If the lights of the track elements of a Switch Board Light Panel shall be controlled by the Switch Board Light-Decoder GBS-DEC-s88 without connection to a digital command station or without a PC with Model Railway Software a timing generator for the s88 Feedback bus will be required. This task will be provided by the new s88-ClockMaster.

Available ex warehouse.

> To product description: s88-ClockMaster

With the KeyCommander (KeyCom), available by us for several years, is it now possible to benefit from the advantage of the simple and reduced wiring of a digital layout even on your analogue layouts. Previously was it possible to program up to 8 drive ways. After the functional extension is it now possible to program max. 16 drive ways with up to 16 switch commands on each Rail-Road.

The KeyCommander is not anymore available.

> To product description: KeyCommander

With the Light-Signal Decoder LS-DEC-FS is the digital switching of up to four 3- to 4- aspect signals or up to two 11-aspect signals of the company Essemme S.r.l. (Mailand, Italien) possible.

Available ex warehouse.

> To product description: LS-DEC-FS

With the Light-Signal Decoder LS-DEC-SJ is the digital switching of up to four Hsi2- or Hsi3-Light Signals with 2- or 3- signal aspects or up to two Fsi2-, Fsi3-, Hsi4- or Hsi5- Light Signals with 2- to 7- signal aspects possible.

Available ex warehouse.

> To product description: LS-DEC-SJ

Normally the s88-feedback bus expects all connected feedback modules behind each others in one line. The data switch DSW-88-N provides the possibility to split the s88-feedback output!

The data switch DSW-88-N provides in addition three 6-poles pin bars for the s88 standard connection and as well three RJ-45 sockets for a bus connection according to s88-N.

Available ex warehouse.

> To product description: DSW-88-N

Via the Light-Signal-Decoder LS-DEC-BR is the connection and control of either four 2- to 4-aspect signals or two 2- to 4-aspect signals with feather possible.

Available ex warehouse.

> To product description: LS-DEC-BR

Via the Light-Signal-Decoder LS-DEC-KS is the digital switching of two Ks-Signals of the Ks-Signalsystem from the Deutsche Bahn possible. It is possible to connect and control Ks-Entry, Ks-Exit, Ks-Advance-Signals and as well Ks-Entry- and Ks-Exit-Multiple-Section-Signals with up to 16 Signal-Aspects.

Available ex warehouse.

> To product description: LS-DEC-KS

The Booster Keep Separation Module BTM-SG provides a secure electrical separation of Booster Circuits. A switch-over track, situated between two booster circuits as separation section will receive only from one booster digital current supply depending to the travelling direction of the train.

Available ex warehouse.

> To product description: BTM-SG

The 8-fold Feedback Module RS-8 contains integrated track occupancy sensors. This module is suitable for monitoring isolated track sections which receive digital current from the RS-8. The design of the RS-8 is suitable for the application at the RS-Feedback Bus of the Digital plus System of company Lenz. The RS-8 is now available as finished module in a case under order code RS-8-G.

Available ex warehouse.

> To product description: RS-8

The Turntable-Decoder TT-DEC-R is suitable for the digital drive of the Roco H0 Turntable 42615.

Available ex warehouse.

> To product description: TT-DEC-R

The Adapter Adap-HSI-s88-N enables to connect s88-Feedbackmodules such as RM-88-N, RM-88-N-O and RM-GB-8-N according to s88-N directly to the Interfaces HSI-88, HSI-88-USB and DiCoStation via the screened Patch-Kabel.

Available ex warehouse.

> To product description: Adap-HSI-s88-N

The DigitalBooster DB-4 provides 2,5 or 4,5 Ampere digital current and supports the digital formats Märklin-Motorola and DCC. With the galvanic separated booster bus connection (5-poles-, CDE- and Roco-booster bus) is it possible to use it on several command stations.

Available ex warehouse.

> To product description: DB-4

The Light-Interface LI-LAN is a PC-Network-Interface for the Model Railway Layout- and Ambient-Room Light-Control Light@Night.

Available ex warehouse.

> To product description: LI-LAN

Empty case for the DigitalBooster DB-4 and the 8-fold Feedback-Module RM-GB-8-N.

Available ex warehouse.

> To product description: LDT-02

The 8-fold Feedback-Module with integrated track occupancy report (novelty 2009) is now available as finished module in a case LDT-02.

Available ex warehouse.

> To product description: RM-GB-8-N

Subject to technical changes and errors.
© 2018 by LDT