S-DEC-4
4-fold turnout decoder for Märklin-Motorola and DCC Digital from our Digital-Professional-Series !
Turnout decoder S-DEC-4 for digital formats DCC and Märklin-Motorola.
Features of the S-DEC-4
For digital control of:
- up to 4 twin-coil magnetic accessories (e.g. turnouts or signals)
- up to 8 single-coil magnetic accessories (e.g. uncoupling tracks)
- up to four permanent power switch units (DSU) (e.g. for turnout-/ and road lights)
The voltage will be supplied to the decoder by a separate input from an alternating voltage output of a model railway transformer (12 to 18Volt ~) or from an insulated power supply unit within a range of 15 to 24 Volt =. Simple and secure connection of turnouts, signals and uncoupling tracks by screw clips.
S-DEC-4 is a 4-fold turnout decoder with self learning decoder address:
- The decoder address can just be set by pushing the S-DEC-4 programming key and then a key on the turnout-switchboard, or by a switch command through a PC with connected INTERFACE.
- The decoder address will be permanently stored, but can always be changed by pressing the programming key again. It’s as simple as that !
Available as ready to use finished module, as finished module in a case or as kit on a 86*76 mm pc-board with four bores for mounting purposes. (Suitable installation material can be found under accessories).
Each of the 4 decoder outputs can be loaded with current up to 1 Ampere. This allows also the shifting of jammed turnouts. It is possible to switch 2 turnouts-/ or 1 turnout and one signal simultaneous.
The S-DEC-4-DC compatible to the DCC data format can now shift turnouts with the function keys F1 to F4 of loc-addresses (e.g. Lokmaus 2® or R3® from Roco)!
If you require a feedback of the turnout position please load the description of turnout_feedback to your pc.
The decoder from our Digital-Professional-Series can be operated without any difficulty from your digital controlled model railway. This decoder is 100% compatible to the Märklin-Motorola data format or the DCC standard.
The finished module and the finished module in a case comes with 24 month warranty.
Each S-DEC-4 decoder will be supplied with a detailed operating-/ assembly instruction. Those instructions can be found within the next section.
The S-DEC-4 is available as a kit (-B), as checked finished module (-F) or as checked finished module in a case (-G).
Downloads
Instructions regarding this article can be found here: Downloads S-DEC-4.
Instructions for all LDT-Components can be found here: Overview Downloads.
Sample-Connections
Sample-connections regarding this article can be found here: Sample-Connections S-DEC-4 (Märklin-Motorola) and Sample-Connections S-DEC-4 (DCC).
Sample-connections for all LDT-Components can be found here: Overview Sample-Connections.
Add to Wish List / Prices
Attention: Products can only be added to the Wish List, if you are registered as customer at the LDT WebShop or if you are initially registered by interest of our products.
![]() | Add to Wish List: S-DEC-4-DC-B (Part-No.: 910211): 4-fold turnout decoder for DCC Digital as a kit (22,90 €*). Add to Wish List: S-DEC-4-DC-F (Part-No: 910212): 4-fold turnout decoder for DCC Digital as a finished module (31,50 €*). Add to Wish List: S-DEC-4-DC-G (Part-No: 910213): 4-fold turnout decoder for DCC Digital as a finished module in a case (34,90 €*). Add to Wish List: S-DEC-4-MM-B (Part-No: 910311): 4-fold turnout decoder for Märklin-Motorola as a kit (22,90 €*). Add to Wish List: S-DEC-4-MM-F (Part-No: 910312): 4-fold turnout decoder for Märklin-Motorola as a finished module (31,50 €*). Add to Wish List: S-DEC-4-MM-G (Part-No: 910313): 4-fold turnout decoder for Märklin-Motorola as a finished module in a case (34,90 €*). ![]() * All prices incl. VAT, plus Shipping. |
---|
Subject to technical changes and errors.
© 2022 by LDT
Märklin and Motorola are registered trade marks.