SA-DEC-4

A 4-fold switch decoder for Märklin-Motorola and DCC Digital from our Digital-Professional-Series !

sa-dec-4-dc-g_sa-dec-4-mm-g_24_ic.jpg

SA-DEC-4 for DCC (left hand) and Märklin-Motorola (right hand) is equipped with 4 bistable relays for a current load of up to 2 Ampere.

Features of the SA-DEC-4

For digital control of:

  • Illuminations and motors.
  • For consumers up to 2 Ampere each output.
  • High-current turnout drives with end-switch: e.g. Märklin gauge 1 turnout and signal drives (without stressing the digital circuit).

The voltage will be supplied to the decoder by a separate input from an alternating voltage output of a model railway transformer (12 to 18Volt ~) or from an insulated power supply unit within a range of 15 to 24 Volt =.
Simple and secure connection of the voltage supply and the consumers by screw clips.

SA-DEC-4 is a 4-fold switch decoder but with a self learning decoder address:

  • The decoder address can be set by pushing the SA-DEC-4 programming key and the key of the turnout control board or by a switch command of your PC with connected INTERFACE.
  • The decoder address will be permanently stored but can always be changed by pressing the programming key again. It’s as simple as that !

A ready to use finished module, finished module in a case or a kit on a 86 x 76 mm pc-board with four bores for mounting purposes are available (Suitable installation material can be ordered under accessories).
The decoder from our Digital-Professional-Series can operate without any difficulty on your digitall model railroad.
This decoder is 100% compatible with the Märklin-Motorola data format or the DCC standard.
The finished module and the finished module in a case comes with 24 month warranty.
Each SA-DEC-4 decoder will be supplied with a detailed operating-/ assembly instruction.
Those instructions can be found within the next section.
The SA-DEC-4 is available as a kit (-B), as checked finished module (-F) or as checked finished module in a case (-G).

Downloads

Instructions regarding this article can be found here: Downloads SA-DEC-4.
Instructions for all LDT-Components can be found here: Overview Downloads.

Sample-Connections

Sample-connections regarding this article can be found here: Sample-Connections SA-DEC-4 (Märklin-Motorola) and
Sample-Connections SA-DEC-4 (DCC).
Sample-connections for all LDT-Components can be found here: Overview Sample-Connections.

Add to Wish List / Prices

Attention: Products can only be added to the Wish List, if you are registered as customer at the LDT WebShop or if you are initially registered by interest of our products.


Add to Wish List:SA-DEC-4-DC-B (Part-No.: 210211): switch decoder for DCC Digital
as a kit (38,50 €*).
Add to Wish List: SA-DEC-4-DC-F (Part-No.: 210212): switch decoder for DCC Digital
as a finished module (46,90 €*).
Add to Wish List: SA-DEC-4-DC-G (Part-No.: 210213): switch decoder for DCC Digital
as a finished module in a case (50,50 €*).

Add to Wish List: SA-DEC-4-MM-B (Part-No.: 210311): switch decoder for Märklin-Motorola
as a kit (38,50 €*).
Add to Wish List: SA-DEC-4-MM-F (Part-No.: 210312): switch decoder for Märklin-Motorola
as a finished module (46,90 €*).
Add to Wish List: SA-DEC-4-MM-G (Part-No.: 210313): switch decoder for Märklin-Motorola
as a finished module in a case (50,50 €*).

* All prices incl. VAT, plus Shipping.

Subject to technical changes and errors.
© 2022 by LDT
Märklin and Motorola are registered trade marks.

 
Recent changes RSS feed Creative Commons License Donate Powered by PHP Valid XHTML 1.0 Valid CSS Driven by DokuWiki Design by Chirripó