For installation of decoders below the railroad layout: We supply under the order code of MON-SET a suitable installation material for the components of the Digital-Professional-Series! Each set consist of four plastic spacers (length 5mm) and four matching wood screws (13mm length). With this items you can assemble all of our digital component easily below your railroad layout.

Attention: Products can only be added to the Wish List, if you are registered as customer at the LDT WebShop or if you are initially registered by interest of our products.

	Add to Wish List: MON-SET (Part-No.: 000103) (0,90 €*). * All prices incl. VAT, plus Shipping.

The case consists of a lower and a upper cover. The printed circuit board shall be placed into the lower case. The upper case can be easily closed over the pc-board by snap locks. The connection clamps and the operating devices will be free accessible.

Dimensions: (length x width x height) 93 x 80 x 32mm.

The LDT-01 a practical and elegant case suitable for:

• Turnout Decoder S-DEC-4
• Turnout Decoder 1-DEC-DC (from Version 2)
• Switch Decoder SA-DEC-4
• Motor-Turnout Decoder M-DEC (from Version 2)
• Light-Signal Decoder LS-DEC-DB, LS-DEC-DR, LS-DEC-KS, LS-DEC-ÖBB, LS-DEC-SBB, LS-DEC-NS, LS-DEC-NMBS, LS-DEC-BR, LS-DEC-FS, LS-DEC-SJ, LS-DEC-SNCF, LS-DEC-CFL, LS-DEC-USA, LS-DEC-CSD and LS-DEC-8x2
• Train Influence Module ZBM
• Feedback Module RM-88-N, RM-88-N-O and RS-16-O
• High-Speed-Interface HSI-88 and HSI-88-USB
• WatchDog-Decoder WD-DEC
• TrainDetect TD-88
• Transponder-Reader COL-10
• Data switch DSW-88-N
• DigitalBooster DB-2
• Track Occupancy Detector GBM-8
• KeyCommander KeyCom
• Reverse-Loop Module KSM-SG
• Booster Keep Separate Module BTM-SG
• TurnTable-Decoder TT-DEC and TT-DEC-R
• s88-ClockMaster s88-CM
• SupplyBox SB-4

Each Case LDT-01 comes with a detailed installation instruction. There are labels for all relevant LDT-Components included for cutting out and sticking them onto the case for identification.

Attention: Products can only be added to the Wish List, if you are registered as customer at the LDT WebShop or if you are initially registered by interest of our products.

	Add to Wish List: LDT-01 (Part-No.: 000104): Gehäuse passend für viele LDT-Komponenten (4,80 €*). * All prices incl. VAT, plus Shipping.

The case consists of a lower and a upper cover. The printed circuit board shall be placed into the lower case. The upper case can be easily closed over the pc-board by snap locks. The connection clamps and the operating devices will be free accessible.

Dimensions: (length x width x height) 117.5 x 100 x 37.5mm.

The LDT-02 a practical and elegant case suitable for:

• DigitalBooster DB-4
• Feedback Module RM-GB-8-N
• Feedback Module RS-8 (from version 3.2)

Each Case LDT-02 comes with a detailed installation instruction. There are labels for all relevant LDT-Components included for cutting out and sticking them onto the case for identification.

Attention: Products can only be added to the Wish List, if you are registered as customer at the LDT WebShop or if you are initially registered by interest of our products.

	Add to Wish List: LDT-02 (Part-No.: 000134): Case for LDT-Components (5,80 €*). * All prices incl. VAT, plus Shipping.

We supply under the order code Kabel s88 0,5m, Kabel s88 1m and Kabel s88 2m a 0,5 meter, 1 meter respectively 2 meter long cable for s88-standard connections for the s88-feedback bus equipped with 2 original s88-plugs. With this connection cables you can connect the feedback module RM-88-N RM-88-N-O and RM-GB-8-N or s88 standard module from Märklin or other suppliers directly together or to the command station or interface at a distance of 0,5m, 1m respectively 2 meters.

If you use the attached pin-bar you can extend the s88-connection of the feedback module RM-DEC-88, RM-DEC-88-O and RM-GB-8 by 0,5m, 1m respectively by 2 meters.

The cable s88 0,5m, cable s88 1m respectively cable s88 2m is a round, interference protected, twisted s88-standard bus cable.

Each Kabel s88 will be supplied with a detailed Operating Instruction.

Attention: Products can only be added to the Wish List, if you are registered as customer at the LDT WebShop or if you are initially registered by interest of our products.

	Add to Wish List: Kabel s88 0,5m (Part-No.: 000102): length 0,5m (12,50 €*). Add to Wish List: Kabel s88 1m (Part-No.: 000106): length 1m (14,50 €*). Add to Wish List: Kabel s88 2m (Part-No.: 000101): length 2m (16,50 €*). * All prices incl. VAT, plus Shipping.

Under the order code Kabel Patch 0,5m, Kabel Patch 1m, Kabel Patch 2m and Kabel Patch 3m are cables with 2 RJ-45 plugs at a length of 0,5m, 1m, 2m or 3m for the s88-connections according to s88-N available.

With this cable you can connect the feedback modules RM-88-N, RM-88-N-O or RM-GB-8-N between each other or via the adapter Adap-HSI-s88-N with the interfaces HSI-88, HSI-88-USB or the DiCoStation at a distance of 0,5m, 1m, 2m or 3m.

Attention: Products can only be added to the Wish List, if you are registered as customer at the LDT WebShop or if you are initially registered by interest of our products.

	Add to Wish List: Kabel Patch 0,5m (Part-No.: 000130): length 0,5m (2,90 €*). Add to Wish List: Kabel Patch 1m (Part-No.: 000131): length 1m (3,90 €*). Add to Wish List: Kabel Patch 2m (Part-No.: 000132): length 2m (5,40 €*). Add to Wish List: Kabel Patch 3m (Part-No.: 000133): length 3m (6,80 €*). * All prices incl. VAT, plus Shipping.

For digital control units and boosters:
5-poles booster bus cable with twisted wires and therefore interference protected for the connection of command stations (e.g. Märklin Control Unit, Central Station 1 and 2, DiCoStation and KeyCom as well as Intellibox, TWIN-CENTER, EasyControl, ECoS, Commander) with boosters (e.g. 6015 / 6017, Power 3, TWIN-BOOSTER, DB-2, DB-4) and for connecting boosters to each other.
Each DigitalBooster DB-2 will be supplied with one Kabel Booster 1m.

The Kabel Booster can not only connect the Booster DB-2 and DB-4 together or with the different command stations. Also the Märklin Control Unit can be connected to the Märklin Booster 6015 (top) or 6017 (bottom) e.g. via the Kabel Booster 1m.

Each Kabel Booster will be supplied with a detailed Operating Instruction.

Attention: Products can only be added to the Wish List, if you are registered as customer at the LDT WebShop or if you are initially registered by interest of our products.

	Add to Wish List: Kabel Booster 1m (Part-No.: 000123): length 1m (12,50 €*). * All prices incl. VAT, plus Shipping.

Booster bus cable with Western-Plugs RJ10 for the connection of the DigitalBooster DB-4 via the Roco-Booster bus with Roco 10761/10764, Fleischmann 680801, multiZENTRALEpro, z21/Z21, Digikeijs Digicentral DR5000 and with further Digital Booster DB-4.

Each Kabel Roco will be supplied with a detailed Operating Instruction.

Attention: Products can only be added to the Wish List, if you are registered as customer at the LDT WebShop or if you are initially registered by interest of our products.

	Add to Wish List: Kabel Roco 1m (Part-No.: 000136): the cable of 100cm length (12,50 €*). * All prices incl. VAT, plus Shipping.

If you do not want to connect the Light-Display or Light-Power Modules of the Light Control Light@Night and Light-DEC directly to each other but intend to assemble those at a larger distance, you can use the cable Kabel L@N 0,5m with a total length of 0,5 meters, the cable Kabel L@N 1m with a total length of 1 meters or the cable Kabel L@N 2m with a total length of 2 meters.

Each Kabel Light@Night will be supplied with a detailed Operating Instruction.

Light-Display-(from version 1.7) and Light-Power-Module (from version 1.2) can be as well connected to each other via patch cable.

Attention: Products can only be added to the Wish List, if you are registered as customer at the LDT WebShop or if you are initially registered by interest of our products.

Add to Wish List: Kabel L-at-N 0,5m (Part-No.: 000102-l@n): length 0,5m (12,50 €*). Add to Wish List: Kabel L-at-N 1m (Part-No.: 000106-l@n): length 1m (14,50 €*). Add to Wish List: Kabel L-at-N 2m (Part-No.: 000101-l@n): length 2m (16,50 €*). Add to Wish List: Kabel Patch 0,5m (Part-No.: 000130-l@n): length 0,5m (2,90 €*). Add to Wish List: Kabel Patch 1m (Part-No.: 000131-l@n): length 1m (3,90 €*). Add to Wish List: Kabel Patch 2m (Part-No.: 000132-l@n): length 2m (5,40 €*). Add to Wish List: Kabel Patch 3m (Part-No.: 000133-l@n): length 3m (6,80 €*). * All prices incl. VAT, plus Shipping.

Turnout drives with integrated end switch produces considerable electromagnetic interferences. Our decoder QS-DEC-II and S-DEC-4 used for these drives are normally free from influence of such interferences. Nevertheless in case it will come to some interferences you should first check the installation of the turnout cables. Those should not turn around the decoder or cross close up directly across the decoder. Install the cables directly straight away from the clamps of the decoder. If it is not possible to change the installation and interferences will occur you should apply 5 to 10 ferrite pearls onto the common connection of each turnout drive (center connection of each output). Take care that the ferrite pearls are assembled close to the drives to prevent that interferences can spread over the connection wires.

Attention: Products can only be added to the Wish List, if you are registered as customer at the LDT WebShop or if you are initially registered by interest of our products.

	Add to Wish List: FP (Part-No.: 000120): 100 ferrite pearls (AD=3,5mm ID=1,5mm L=5mm) (9,50 €*). * All prices incl. VAT, plus Shipping.

Subject to technical changes and errors.
© 2022 by LDT