LDT-Digital components for Märklin Central Station 1 with ESU Upgrade "Reloaded" (Märklin-Motorola-Format)
Within the following listing you can find all products of our company. By activating a particular link you will receive detailed information and the possibility to order the article.
Further overviews about our products:
- To Product Overview sorted by digital format:
Because every LDT-Decoder with external power supply includes a galvanical separation between the digital electrical circuit and the power supply is an application of the decoder at the Central Station 1 possible without any problem.
At the sample (attend to the above Display of the Central Station) will be the first 8 turnouts (addresses 1 to 8) switched via two Tournout-Decoder S-DEC-4-MM.
Via the left clamp bar of a Light-Signal Decoders LS-DEC-DB will it be possible to switch one main signal via address 13 and 14 and one block signal via address 15.
Two outputs of a Switch-Decoder SA-DEC-4-MM can switch lights on or off at the layout via addresses 17 und 18.
Switching
At the section “Switching” our program offers decoders for the digital format of Märklin-Motorola.
Turnout Decoder
Switch Decoder
- SA-DEC-4: 4-fold switch decoder with 4 bistable relays with each 2 Amp. switching power.
With self learning decoder address and external power supply possibility.
Turnout-Decoder for motor driven turnouts
- M-DEC: 4-fold decoder for motor driven turnouts with self-learning decoder address and
external power supply possibility.
Light-Signal Decoder
4-fold Light-Signal Decoder with a self-learning decoder address and external power supply.
- LS-DEC-DB: Light-Signal Decoder (Deutsche Bundesbahn).
- LS-DEC-DR: Light-Signal Decoder (Deutsche Reichsbahn).
- LS-DEC-KS: Light-Signal Decoder (Deutsche Bahn).
- LS-DEC-ÖBB: Light-Signal Decoder (Austrian Federal Railway).
- LS-DEC-SBB: Light-Signal Decoder (Swiss Federal Railway).
- LS-DEC-NS: Light-Signal Decoder (Nederlandse Spoorwegen).
- LS-DEC-NMBS: Light-Signal Decoder (Nationale Maatschapping of the Belgian Spoorwegen).
- LS-DEC-BR: Light-Signal Decoder (British Railway).
- LS-DEC-FS: Light-Signal Decoder (Governmental Railway Corporation of Italy – Ferrovie dello Stato).
- LS-DEC-SJ: Light-Signal Decoder (Swedish State Railway).
- LS-DEC-SNCF: Light-Signal Decoder (Governmental Railway Corporation of French - Société Nationale des Chemins de fer Français).
- LS-DEC-CFL: Light-Signal Decoder (National Railway Company of Luxembourg).
- LS-DEC-USA: Light-Signal Decoder (for American Color Light Signals).
- LS-DEC-CSD: Light-Signal Decoder (Czechoslovakian National Railway).
- LS-DEC-8x2: Light-Signal Decoder (for eight 2-aspect Light Signals).
Adapter for Light-Signal Decoder
Train Influence Module for Light-Signal Decoder
- ZBM: 4-fold train influence module for 4 stop sections. Cuts off the driving power supply if signal is on red.
TurnTable-Decoder
- TT-DEC-R: The Turntable-Decoder TT-DEC-R is suitable for the digital control of the Roco H0 Turntable 42615.
- TT-DEC: The Turntable-Decoder TT-DEC is suitable for the digital control of Fleischmann-Turntables 6052, 6152, 6154, 6651, 9152, 6680 (with and without ”C”), 6652 (with 3-rail conductor), the Roco Turntable 35900 and the Märklin-Turntable 7286.
- DSU: Permanent-Power-Switch-Unit will change the polarity of a 2-conductor turntable bridge at every 180 degree turning of the turntable if combined with the TurnTable-Decoder TT-DEC.
WatchDog-Decoder
- WD-DEC: The WatchDog decoder WD-DEC is a watch-dog for your pc supported digital model-train-railroad. If the model railway software has lost the control about the layout, the WD-DEC will switch the tracks free of current via the connected boosters and all trains will be immediately stopped.
Decoder for Switchboard Lights
- GBS-DEC: The Decoder for Switchboard Lights GBS-DEC supplies current to the light emitting diodes or to the incandescent lamps of the track switchboard panel. The GBS-DEC is available for the digital formats Märklin-Motorola and DCC as well for the s88-feedback bus. The Decoder for Switchboard Lights GBS-DEC consist of a GBS-Master Module, a GBS-Display Module and the GBS-Service Module.
- s88-ClockMaster: As a supplement to the Switchboard Light-Decoder GBS-DEC to be used without a digital command station or without a PC with model railway software.
Feedback
For “Feedback” we offer products for the s88-feedback bus.
s88-feedback bus
- RM-88-N:16-fold Standard-Feedback Module (switching against ground) for s88-standard connections and bus connections in accordance to s88-N.
- RM-88-N-O: 16-fold Feedback Module with opto-coupling inputs for potential separation and for high interference protection. For s88-standard connections and bus connections in accordance to s88-N.
- RM-GB-8-N: 8-fold Feedback Module with integrated track occupancy report for s88-standard connections and bus connections in accordance to s88-N.
- DSW-88-N: With the Data switch DSW-88-N the s88-feedback bus can be branched into two lines at any place on the model railway. Several DSW-88-N can be used to build one ore more feedback lines. For s88-standard connections and bus connections in accordance to s88-N.
DigitalBooster
- DB-2: The short-circuit proofed DigitalBooster DB-2 supplies 2.5 Ampere digital current. The DB-2 shall be connected to the command station via a 5-poles booster bus and amplifies the digital formats Märklin-Motorola, mfx®, M4 and DCC.
- DB-4: The DigitalBooster DB-4 provides 2.5 or 4.5 Ampere digital current. Via the galvanic separated booster bus (5-poles-, CDE- and Roco-booster bus) is it possible to connect it to the command station and amplifies the digital formats Märklin-Motorola, mfx®, M4 and DCC.
Booster Keep Separate Module
- BTM-SG: Provides a secure electrical separation of booster current circuits.
Suitable for all digital formats, all command stations and boosters.
High Speed Interfaces
Legal Doping: High Speed Interface for the s88-feedbackbus!
To provide feedback reports fast and without detours via the digital command station to the PC we offer the High Speed Interfaces for the s88-feedback bus within our program. With this option you can install up to 3 s88-feedback lines with up to 496 contacts.
- HSI-88: High-Speed-Computer-Interface for fast report of s88-feedback modules to the PC via the COM-interface.
- HSI-88-USB: High-Speed-Computer-Interface for fast report of s88-feedback modules to the PC via the USB-interface (1.1 / 2.0 Full-Speed).
- Adap-HSI-s88-N: With the Adapter is it possible to connect s88-feedback modules in accordance to s88-N direktly to the interfaces.
SupplyBox
- SB-4: Practical unit for the direct current supply from switched mode mains power supply.
Accessories
Here you can find e.g. Assembly Material, Casings or Bus cable for our Components.
- MON-SET: For fitting devices underneath the layout we supply suitable installation material consisting of four spacers each 5mm long and four 13mm screws.
- LDT-01: The small elegant practical case for several LDT-components. Suitable for: 1-DEC-DC (from version 2), Adap-CDE, Adap-Roco, COL-10, DB-2, DSW-88-N, GBM-8, HSI-88(-USB), KeyCom, KSM-SG, LS-DEC, M-DEC (from version 2), RM-88-N, RM-88-N-O, RS-16-O, s88-CM, S-DEC-4, SA-DEC-4, SB-4, TD-88, TT-DEC(-R), BTM-SG, WD-DEC and ZBM.
- LDT-02: The big elegant practical case for LDT-components.
Suitable for: DB-4, RM-GB-8-N and RS-8 (from version 3.2). - Kabel s88: Connection cable (0.5m, 1m, 2m) for s88-standard connection with two original s88-plugs plus pin-plug for bus extension.
- Kabel Patch: Connection cable (0.5m, 1m, 2m, 3m) for s88-standard connections according to s88-N with 2 RJ-45 plugs.
- Kabel Booster: 5-poles booster bus-cable (1m) with twisted wires and interference protected for the connection of command stations (e.g. Control Unit, Central Station 2, Intellibox, TWIN-CENTER) with boosters (e.g. 6015 / 6017, Power 3, TWIN-BOOSTER, DB-2, DB-4) and for connecting boosters to each other.
- Ferrite pearls: For the elimination of disturbance caused by turnouts with integrated end switches.
- Electronic articles: Electronic articles for Model-Railroader.
- Electronic Spare Parts: Electronic Spare Parts for LDT-Components.